Advantages and benefits of 12 volt lithium-ion forklift battery from lithium-ion traction battery manufacturers & suppliersForklift Battery Supplier
Advantages and benefits of 12 volt lithium-ion forklift battery from lithium-ion traction battery manufacturers & suppliers
You may choose to use 12 volt batteries for your forklift. Making the right choice can be difficult because the market is flooded with so many options today. At the end of the day, you need a battery that matches your forklift’s kind of needs. You should use a 12 volt lithium-ion forklift battery because this is the most robust technology available in the market today. When used correctly, you stand to gain a lot.
You need to check the design, the capacity, the kind of maintenance needed, and the costs involved with the battery. While the cost can be a bit discouraging, lithium-ion batteries bring great changes to the table.
If you are wondering why you should use a 12 volt lithium-ion forklift battery, you should take the time to understand why this technology is so popular today. The batteries are being used in so many applications. These batteries last a long time when used the right way.
• Never over-discharge or overcharge cells
Most batteries fail early because of over-discharging or overcharging. When this occurs even once, permanent damage can occur, which is never good. Having a protection system helps avoid this, ensuring that the cells don’t go beyond the set voltage range. Overcharging can lead to cell heating, and when it is too extreme, it becomes a fire hazard. Overcharging can be caused by poor installation of the protection system, infective system, and the lack of a good battery protection system.
The battery protection system is set so that the load is disconnected when cells start getting to a specified empty limit. If they go beyond a set limit, they may be damaged permanently.
• Clean terminals
Before making an installation, the terminals need to be cleaned. Battery terminals are usually made using cover and aluminum. Over time, an oxide layer can be formed because of air exposure. Before installing the BMS modules and cell interconnectors, it is important to clean the terminals well using a wire brush. This removes the oxidation. If there are bare interconnectors, clean them as well. This improves conduction and reduces the incidence of heating.
• Ensure that you have the correct mounting hardware for the terminals
It is important to understand the terminals that you have. Different terminals require different mounting hardware. Doing it the correct way guarantees the best outcome. The cell tread depth has to be determined as this can greatly help determine which hardware is needed. All terminal bolds should be checked from time to time to ensure that they are still tight. When terminal bolds are loose, they cause some high resistance connections, which could lead to heat generation.
• Frequent charging
You can boost your lithium-ion battery and increase its cell life by first avoiding deep discharges. The recommended DoD is around 70-80 percent, except when there is an emergency.
• Swollen cells
If you notice swollen cells, it is often because of over-discharge and sometimes overcharge. Usually, when swelling occurs, it does not mean that the cell cannot be used. However, it will lose capacity because of this.
You should use a 12 volt lithium-ion forklift battery because there are so many good things associated with it. If it matches your needs, then it is the best choice.For more about advantages and benefits of 12 volt lithium-ion forklift battery from lithium-ion traction battery manufacturers & suppliers,you can pay a visit to JB Battery China at https://www.forkliftbatterymanufacturer.com/product-category/12-volt-lithium-ion-agv-amr-battery/ for more info.